Wera & Wiha Screwdriver French Cleat Holder - 3D Printer File

Description Comments Tags

Description

Wera & Wiha french cleat screwdriver holders

Storage for up to 6 screwdrivers - 4 different versions included
- Optimized for Wera and Wiha screwdrivers (snug fit, 3 different types, see details below to assess fit before printing)
- Additional Generic one-size-fits-all version with larger openings to fit most use cases (loose fit)
Reduced wall footprint compared to single-row designs - only 140 mm wide
Easy access from the side - no need to pull the screwdrivers up the full shaft length, allowing for easier handling and less space requirements
Same design language as other french cleat organizers published by me
Designed for 18 mm (or ¾") french cleat thickness; center of gravity of this design is decent for normal operation but obviously if you put a lot of force on the outmost edge it will tip over
Supports enabled - easy to remove with almost no rework required

Boost MeThanks a lot for your support - hope you enjoy this model. If none of the options provided work for you, please let me know in the comments together with the dimensions and I will try to make another version.

Interested in more of my designs for French Cleat, IKEA Skadis or Vaccum tools? Here is an overview of my collections:

Print plate overview

Plate 1: Wera electrical screwdriver set

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

36.5 / 30.5 / 10 (Wera 006154, PH2x100)
33 / 30.5 / 10 (Wera 006120, 1.0x5.5x125)
33 / 27.5 / 8 (Wera 006152, PH 1x80)
33 / 27.5 / 8 (Wera 006115, 0.8x4.0x100)
26 / 21.5 / 7 (Wera 006110, 0.6x3.5)
26 / 21.5 / 8 (Wera 006100, 0.4x2.5)

Plate 2: Wera Torx screwdriver set (Wera 367 series)

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

40 / 34.8 / 8 (Wera TX40)
36 / 29.8 / 7 (Wera TX30)
32 / 29.8 / 6 (Wera TX25)
36 / 25.5 / 6 (Wera TX20)
32 / 25.5 / 5 (Wera TX15)
25 / 21.8 / 5 (Wera TX10)

Plate 3: Wiha SoftFinish screwdriver set

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

All positions: 13.1 mm lower handle diameter
36.6 / 28 / 7
35 / 28 / 7
29 / 20.5 / 6
30 / 20.5 / 5.5
30 / 20.5 / 5
23.5 / 17.5 / 4.5

Plate 4: Generic screwdriver set

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

40 / 36 / 11
40 / 36 / 11
33 / 31 / 10
33 / 31 / 10
30 / 26 / 8.5
30 / 26 / 8.5

Update Nov 16, 2025: Additional print profile with 2 new variants

Additional profile/plate 1:

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

32 / 25.5 / 6.2 (Wera 335 Slot 1.0x5.5x125)
32 / 25.5 / 4.7 (Wera 335 Slot 0.8x4.0x100)
26 / 21.5 / 3.7 (Wera 335 Slot 0.5x3.0x80)
36 / 29.8 / 6.7 (Wera 350 PH 2x100 or Wera 355 PZ 2x100)
32 / 25.5 / 5.2 (Wera 350 PH 1x80 or Wera 355 PZ 1x80)
26 / 21.5 / 6.5 (Wera 160 Electrical Slot 0.4x2.5x80)

Additional profile/plate 2:

Hole and opening dimensions (handle diameter / deepening diameter / shaft opening diameter - all in mm)

36 / 34.8 / 6.7 (Wera 350 PH 2x100 or Wera 355 PZ 2x100)
36 / 29.8 / 6.7 (Wera 350 PH 2x100 or Wera 355 PZ 2x100)
32 / 29.8 / 6.2 (Wera 350 PH 1x80 or Wera 355 PZ 1x80)
32 / 25.5 / 5.2 (Wera 350 PH 1x80 or Wera 355 PZ 1x80)
32 / 25.5 / 5.2 (Wera 335 Slot 1.0x5.5x125)
32 / 21.8 / 4.6 (Wera 335 Slot 0.8x4.0x100)

License:

Standard Digital File License