December 23, 2014
Description
Version three of the Octopus tablet stand. This one was designed to fit the iPhone 6/6 Plus, iPad Air and a slew of Android devices. There should be just enough room for a case with most devices. I recommend adding a little bit of sticky adhesive to the bottom to keep it nice and secure.
I've uploaded a slightly earlier version of the design. It has bit tighter of an opening and slightly more height to it if you find your device is wobbly.
Note: the Moto X 2014 is pretty wobbly in it and I would not recommend it at this time.
I've printed a copy of this out at Shapeways myself, as I am absent a 3D Printer :( You can find it here if you're in the same boat as I.
http://shpws.me/wIBN
License:
Creative Commons - Attribution - Non-Commercial
notcolinforreal
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/thumbs/cover/320x240/jpeg/195cfe9b-40fc-4570-b695-c540798fc979.jpeg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg "Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image")
